electric forklift

Electric forklift is a lifting equipment that can be used in warehouses. When lifting, a hydraulic system is required, but after multiple lifts, hydraulic oil needs to be added to the oil hole. However, some users do not know where it is. Let’s take a look together.

Before starting to refuel, we need to adjust the key to enable loading, and then use the gantry cylinder to adjust the fork to a slightly higher position than the ground. Adjust the tilt cylinder: Push the tilt cylinder to its maximum forward tilt angle.

Hydraulic oil return operation: when the key switch is turned off, adjust the control lever backward to the limit position to ensure that the hydraulic oil returns from the tilt cylinder to the oil tank, and the gantry continues to tilt backward.

The refueling hole is located at the bottom circular hole of the forklift. Simply remove the plug to refuel. Be sure to refuel slowly and not too quickly to prevent overflow.